Centra Teknik
Centra Teknik - Jual Flow Meter Tokico dan Water Meter Itron
Powogaz water meter consists of body, measurement unit, and counting mechanism. A water jet push rotor is placed in the measurement unit. The rotor is carefully placed into the body's ducts and through the working system and the worm's wheel moves the magnets placed in the axle. Magnets in the wet part of the water meter are coupled with magnet counters in the dry part of the water meter. Water meter gauges and wheels that add to the volume of water measured are driven by the gear system.
Water Meter 5 inch 125mm water meter,water meter , , distributor water meter , water meter , harga water meter , supply water meter , stockist...
Water Meter 2 1/2 inch (DN65)Spesifikasi :Type : MWN64 Nubis R112563 Q(m3/h)DN : 65mmLength : 200mmConnetion : FlangeWeigt : 10,6kgMeasurement range...
water meter air dingin 4 inchSpesifikasi :Type : MWN100 Nubis R200160 Q(m3/h)DN: 100mmLength: 250mmConnetion: FlangeWeigt: 15,6kgMeasurement range...
water meter 4 inch cold waterSpesifikasi :Type: MWN100 Nubis R200160 Q (m3 / h)DN: 100mmLength: 250mmConnetion: FlangeWeigt: 15.6kgMeasurement range...
water meter 2 inch air dingin DN50Spesifikasi :Type : MWN50 Nubis R10040 Q(m3/h)DN: 50mmLength : 200mmConnetion: FlangeWeigt : 9,9kgMeasurement...
Water Meter 3 inch 80mmSpesifikasi :Type : MWN80 Nubis R160100 Q(m3/h)DN : 80mmLength : 225mmConnetion: FlangeWeigt : 13,8kgMeasurement...
Water Meter 2 1/2 inch (DN65)Spesifikasi :Type : MWN64 Nubis R112563 Q(m3/h)DN : 65mmLength : 200mmConnetion : FlangeWeigt : 10,6kgMeasurement range...
Flow meter 3″(80mm)Spesifikasi :Type : MWN80 Nubis R160100 Q(m3/h)DN : 80mmLength : 225mmConnetion : FlangeWeigt : 13,8kgMeasurement range...
Flow meter air dingin DN80 – Flow meter 3InchSpesifikasi :Type : MWN80 Nubis R160100 Q(m3/h)DN : 80mmLength : 225mmConnetion : FlangeWeigt : 13...
Water Meter 50mm (2 inch)Nominal Diameter : 50 mm ( 2 inch )Maximum Flow Rate : 30 m3/hMaximum Working Flow Rate : 15 m3/hTransional Flow Rate : 1.5...
We present water meter operating instructions with a DN 40÷300 flange connector, manufactured by Apator Powogaz S A in Poznań, in accordance with the procedures of an integrated system of quality, environmental and safety management. Please read the instructions thoroughly before installing the flow transducer to ensure use is in accordance with its intended use.
© -Powered by Indotrading.
